Article provided by: Rolland Reash Plumbing
Sudden damp spots on your floor and low water pressure could some of the annoying symptoms of a slab leak. A slab leak is what happens when the pipes beneath the foundation leak.
Are slab leaks dangerous?
Unattended slab leaks saturate the soil and eventually make the soil too unsteady for the house structure. The weak floor will soon crack and expand to distort the windows and doors, such as shatters and improper opening and closing motions.
A leak in your carpet and floor will cause the growth of mold, mildew, and a stinky atmosphere.
A slab leak in your backyard will damage the grass, landscaping, and pool structure.
It is essential to be aware of the primary causes of a slab leak in Jacksonville FL to minimize the possibility of your home suffering a similar fate.
Causes of slab leaks
The most common cause of slab leaks is improper construction, installation of pipes or slab leak repair service. Sealing the foundation with kinked, bent or dented pipes is equivalent to causing a slab leak. The affected spots on the pipe cause leakage and increase the chances of a burst. Certain materials like copper have a higher risk of suffering a burst because they are soft and vulnerable.
Older homes have more cases of corroded pipes because they often have galvanized steel and copper in the pipes. Additionally, the best materials are still degradable and will weaken and thin after a couple of decades. It is essential that the Rollan Reash Plumbing plumber in Jacksonville FL uses new pipes while constructing an old home because the old tube is probably too weak for the foundation.
Water pressure is not the only kind that can instigate a slab leak. Pressure from a ground shift is equally damaging to the pipe. These include:
- Soil erosion
- Underground steam
An indirect pressure influence is storm weather that is strong enough to shift the soil. Another cause of pressure is the clay that is in contact with the pipe. Its chemical composition changes when it reacts with water to expand. It dries as the water shrinks and causes a similar reaction on the canal.
Poor water quality
Keep an eye on the water’s Ph if you want to prevent a slab leak due to a degradation of the pipe. Excessively acidic or alkaline water erodes the tube and creates potentially irreversible damage. The right Ph should be between 6.5 and 8.5.
Abrasion is a common cause of a slab leak in Jacksonville FL. Pipes that have regular rubs in their course of use will wear down to the friction. Hot water pipes will have faster abrasion because the pipe always rubs against concrete and gravel in the surrounding soil to cause friction.
A professional plumber is your best bet in determining the cause of the slab leaks in your property. We will not leave any stone unturned because we have the best technological solutions for slab leak detection and repair in Jacksonville. Contact us immediately you notice all the signs that require a home foundation leak detection. We will repair more than the suspected damage with all plumbing solutions in our portfolio.
Slab Leak Jacksonville Fl